Nebulizer With Mouth Piece

Nebulizer with mouth piece

Made of medical grade PVC

Used with any of the compressor/nebulizer for treatment of asthmatic patients.

Designed for comfortable administration of fine mists of uniform density to reach deep into lung cavity.

Simple three-piece design is easy to assemble and clean.

Break-resistant plastic provides the patient with 14 days of use with 15 cm corrugated tube

With 2m tubing

With T-piece and mouthpiece

Packed in individual PE bag

There are many components of the mouth containing atomizer. Wherein: the atomization assembly comprises a universal conversion tube, an upper cover, a lower cover and a conduit; a central portion of the inner bottom of the lower cover is a conical body, and a hole at the top end of the conical body communicates with the outer interface of the lower cover, and the lower end is tapered and The cone set in the cover has an interface to the outside of the lower cover.

The oral atomization device has the advantages of simple structure, low cost and convenient operation. According to different patient needs, by using a multifunctional atomization device, oxygen is used as a driving source to rapidly lyse the drug into particles, which are inhaled by the patient in the form of an aerosol. Distributed in the respiratory lesions, producing direct effects.

In the process of using a mouth atomizer, if it is a compression device, the dosage is generally up to 10 ml. If more, the atomization time will be long and not suitable. As for the specific dose, it is more appropriate to follow the doctor's advice. After all, different doses of different doses, and finally with the combination of the fitness can be atomized.

The actual operation procedure of the mouth containing atomizer is as follows: firstly pour the appropriate amount of the drug into the atomization cup, and then the amount of the solution to be superized is tightened by a 6 ml lid atomization cup; then the mouthpiece or the atomizing mask and the cup air tube are connected to check the inside of the host. No filter cotton; connect the host power supply to power off the host to work 1-2 hours to connect the host spray port and the cup air port mouth with a mouthpiece or wear an atomizing mask for atomization treatment; wait for the drug to stop using the treatment Air pipe shutdown should be used: check whether the machine is installed before use. It can be filled with warm water or hot water in the atomizing cup. The liquid can be added in excess of 6 ml per suction. It can be used continuously for 30 minutes. Do not carry or store the product in its internal storage.